Assembly
Yes, but we recommend plywood when there is a large concentration of weight.
Yes, leveled out dirt is just fine.
Our floors are made from the same 28-gauge galvanized metal insulated panels we use for the walls and roof. Plywood is not required under our floor, just leveled ground.
Yes, you can install hooks, racks, shelves or anything else you would install on any wall. They best locations to screw into the wall are on the joints.
Yes, we can deliver and set-up (Assemble) a shed for you. Your cost is based on the size of the shed and delivered location.
Yes, that was one of our sheds that the customer finished himself. He told me it cost him around $100.00 for the cedar singles and his labour over a weekend.
Yes, we only sell them in white and once assembled they would be ready for paint as they are primed & powder coated.
Delivery Information & Site Displays
We can deliver to most areas within the province.
Delivery time is usually 2 to 4 weeks.
We generally deliver them as four walls. However, if the shed is wider then 10 feet, those walls will come in two pieces.
There is no extra charge for us to help you to put the shed in your backyard.
Technical Infomation
When a steel insulated door is manufactured and a window is to be inserted in the door (i.e. French door, patio door) the manufacturer must cut the center of the door out in order to insert the window. This creates a cut-out panel approx. 35″x22″. This panel has 28 gauge metal on both sides as well as 1 3/4″s of R12 insulation sandwiched in the center. We receive these new panels and through a process we developed, the panels are cleaned, grooved, and interlocked together to make our shed.
No. the panels we use comes from brand new steel doors.
Yes, our sheds are made from panels generated as a by-product of the outside Steel Door Industry. Each insulated panel is a 1¾ inch block of R12 foam insulation sandwiched between white powder coated & primed 28-gauge galvanized metal that we re-cycle into the basic building-block of our product line. This process can be better explained in one of our videos located on our home page.
Yes, we can supply full lite clear windows. Windows and other accessories can always be added later.
Yes, many of are clients have wood burning stoves in there units. To install one you would use the same codes as you would for any building.
Yes, our buildings are used in a variety of different applications such as backyard studios, cabins, workshops, commercial and agricultural storage structures and much more. The finished product is a versatile insulated metal structure that is amazingly strong, virtually indestructible, and ideal for residential and commercial storage. It is especially suited for use in the urban forest-interface zone as the structure is impervious to fire.
The panels are inter-locking, like Lego. The video on our
Assembly will show you how they are made to inter-lock. We also have two other videos on the
Assembly page that will show you how the walls are joined together at the corners, etc.
The sheds are powder coated with white primer on 28-gauge galvanized metal, they will not rust and will give you years of maintenance free service.
No, we supply the roof with the shed. It is made from the same panels as the walls and floor.
It is unlikely, as they are portable. Sometimes the larger sheds may require a permit, it varies from municipality to municipality.
The roof is made out of the same 28-gauge galvanized metal panels as the walls. Our sheds are amazingly strong, virtually indestructible.
Yes, the roof is very strong.
A standard single door is 39″ wide.
